EZ-PDCCG4
EZ-PDCCG4 is USB Type-C Port Controller manufactured by Cypress.
PRELIMINARY
EZ-PD CCG4
USB Type-C Port Controller
EZ-PD CCG4, USB Type-C Port Controller
General Description
EZ-PD™ CCG4 is a dual USB Type-C controller that plies with the latest USB Type-C and PD standards. EZ-PD CCG4 provides a plete dual USB Type-C and USB-Power Delivery port control solution for notebooks, power adapters and docking stations. It can also be used in dual role and downstream facing port applications. EZ-PD CCG4 uses Cypress’s proprietary M0S8 technology with a 32-bit, 48-MHz Arm® Cortex®-M0 processor with 128 KB flash and integrates two plete Type-C Transceivers including the Type-C termination resistors RP and RD.
Applications
- Notebooks
- Power adapters
- Docking stations
Features
32-bit MCU Subsystem
- 48-MHz Arm Cortex-M0 CPU
- 128-KB Flash
- 8-KB SRAM
Integrated Digital Blocks
- Up to four integrated timers and counters to meet response times required by the USB-PD protocol
- Four run-time serial re-configurable I2C, munication blocks (SCBs) SPI, or UART functionality with
Clocks and Oscillators
- Integrated oscillator eliminating the need for external clock
- Integrated dead battery termination for DRP (Power Source/Sink) applications
- Supports two USB Type-C ports
- Integrated VCONN FETs to power EMCA cables
- Integrated fast role swap and extended data messaging (not supported for 33-ball CSP part)
Low-Power Operation
- 2.7-V to 5.5-V operation
- Independent supply voltage pin for GPIO that allows 1.71-V to
5.5-V signaling on the I/Os
- Reset: 1.0 µA, Deep Sleep: 2.5 µA, Sleep: 2.5 m A
System-Level ESD on CC...
