ACG1F Datasheet | Cypress

 ACG1F Datasheet USB Type-C Port Controller ACG1F Datasheet, USB Type-C Port Controller General Description ACG1F (Type-A to Type-C Generation - 1 FET) is a single-port USB Type-C controller that plies with the latest USB Type-C specifications. ACG1F provides a plete USB Type-C control solution for notebooks and desktops. It can also be used in devices required to convert legacy Type-A data port to Type-C data port. ACG1F uses Cypress' proprietary M0S8 technology with a 32-bit Arm® Cortex®-M0 processor with 16-KB flash and integrates a Type-C controller (no Power Delivery) and a VBUS load switch (5 V/3A). Features USB Type-C Support - Integrated Type-C controller supporting Type-C v1.3 - Integrated 2x VCONN FET with OCP to power EMCA cable Integrated VBUS Load Switch Controller - Integrated VBUS load switch supports - 5 V/3A VBUS NFET - RDSon of load switch: 45-m (typ) for 40-QFN,15-m (typ) for 24-QFN - Slew rate control turn-ON on the provider VBUS switch - Configurable hardware-controlled VBUS overvoltage protection (OVP), overcurrent protection (OCP), and reverse current protection (RCP) - VBUS high-side current sense amplifier across external precision series resistance (Rsense) of 5 m. - Over temperature thermal shutdown - VBUS to CC short circuit protection up to 20 V 2x I2C - Supports USB Type-C Connector System Software Interface (UCSI) over I2C interface - Controls external high-speed redriver/retimer mux interface over I2C Legacy Charging - Integrated Charge Detect: BC v1.2 32-bit MCU Subsystem - 16-MHz Arm Cortex-M0 CPU - 16-KB Flash - 4-KB SRAM - 32-KB...