CCG3PA2 Datasheet | Cypress

Description EZ-PD™ CCG3PA2 is Cypress’ highly integrated USB Type-C port controller that plies with the latest USB Type-C and PD standards and is targeted for cable and power adapters applications. In such applications, CCG3PA2 provides additional functionalities and BOM integration advantages. CCG3PA2 uses Cypress’ proprietary M0S8 technology with a 32-bit Arm® Cortex®-M0 processor, 2×64-KB flash, a plete Type-C USB-PD transceiver, all termination resistors required for a Type-C port, an integrated feedback control circuitry for voltage (VBUS) regulation, and system-level ESD protection in 32-pin QFN and 30-ball CSP packages. Features Type-C Support and USB-PD Support - Supports USB PD3.0 Version 1.1 Spec including Programmable Power Supply Mode - Configurable resistors RP, RD, and RA - Supports one USB Type-C port and one Type-A port - Firmware control to electrically disconnect RAwhen not required in order to save source power 2× Legacy/Proprietary Charging Blocks - Supports QC 4.0, Apple charging 2.4A, AFC, BC 1.2 - Integrates all required terminations on DP/DM lines Integrated Voltage (VBUS) Regulation and Current Sense Amplifier - Analog regulation of secondary side feedback node (direct feedback or opto coupler) - Integrated shunt regulator function for VBUS control - Constant current or constant voltage mode - Supports low-side current sensing for constant current control System-Level Fault Protection - On-chip OVP, OCP, UVP, and SCP - Supports OTP through integrated ADC circuit - Short to VBUS protection for CC, SBU, and VCONN pins up to 24.5VDC 32-bit MCU Subsystem - Arm Cortex-M0 CPU - 2x64-KB Flash - 8-KB SRAM Clocks and Oscillators - Integrated oscillator eliminating the need for external clock Power - 3.0 V to 24.5 V operation (using on-chip 30VAC tolerant LDO) - Deep Sleep: 15 μA, Sleep: 3 m A - Integrated 24.5VDC, 30VAC tolerant regulator and VBUS control signals System-Level ESD Protection - On CC, VCONN, VBUS_C_MON_DISCHARGE, SBU, and DP0/DM0...