MB96630 Datasheet | Cypress

Features - Technology 0.18m CMOS - CPU  F2MC-16FX CPU  Optimized instruction set for controller applications (bit, byte, word and long-word data types, 23 different addressing modes, barrel shift, variety of pointers)  8-byte instruction queue  Signed multiply (16-bit × 16-bit) and divide (32-bit/16-bit) instructions available - System clock  On-chip PLL clock multiplier (1 to 8, 1 when PLL stop)  4MHz to 8MHz crystal oscillator (maximum frequency when using ceramic resonator depends on Q-factor)  Up to 8MHz external clock for devices with fast clock input feature  32.768k Hz subsystem quartz clock  100k Hz/2MHz internal RC clock for quick and safe startup, clock stop detection function, watchdog  Clock source selectable from mainclock oscillator, subclock oscillator and on-chip RC oscillator, independently for CPU and 2 clock domains of peripherals  The subclock oscillator is enabled by the Boot ROM program controlled by a configuration marker after a Power or External reset  Low Power Consumption - 13 operating modes (different Run, Sleep, Timer, Stop modes) - On-chip voltage regulator Internal voltage regulator supports a wide MCU supply voltage range (Min=2.7V), offering low power consumption - Low voltage detection function Reset is generated when supply voltage falls below programmable reference voltage - Code Security Protects Flash Memory content from unintended read-out - DMA Automatic transfer function independent of CPU, can be assigned freely to resources - Interrupts  Fast Interrupt processing  8 programmable priority levels  Non-Maskable Interrupt (NMI) - CAN  Supports CAN protocol version 2.0 part A and B  ISO16845 certified  Bit rates up to 1Mbps  32 message objects  Each message object has its own identifier mask  Programmable FIFO mode (concatenation of message objects)  Maskable interrupt  Disabled Automatic Retransmission mode for Time Triggered CAN applications ...