UG1094 Datasheet | DDK

BNC Series BNC Type Connectors .. - BNC series is most widely used as 50 Ω coaxial cable connectors. - This series is used specially for interface of fre- quent fit-in/pull-out instruments by small size/ light weight bayonet lock mechanism. Note: BNC series is intermateable with BNC75 series. (75Ω group) - If 75 Ω cable is used for this series, the frequency to be applied must be below 200MHz. For more than 200MHz, BNC75 series must be used. CONFORMING STANDARD JIS-C-5412、 MIL-C-39012、 DSP-C-6202、 NTTSpec No.2095 SPECIFICATION Characteristic Impedance Dielectric withstanding voltage Insulation resistance Contact resistance VSWR 50Ω 1500V AC (rms) for 1 minute 1000MΩmin. at 500V DC 3mΩ max. 1.3max. at DC～2GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Contact (male) Contact (female) Insulators Gaskets Copper alloy/Silver or Nickel plating Copper alloy/Silver or Gold plating Copper alloy/Silver or Gold plating PTFE Silicone rubber Please ask us for the cable assemblies to assure its performance. - 　 1- BNC Series - Plug Clamp Type φ14.5 φA .. Unit : mm P/N BNC-P-3 Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-62/U RG-62/U RG-59/U RG-62/U RG-59/U RG-62/U φA 6.4 6.4 6.4 5.4 5.4 6.6 6.6 6.55 6.55 （L） 25.0 25.0 25.0 27.0 27.0 26.2 26.2 24.6 24.6 Finish Shell Ag Ni Ni Ag Ni Ag Ni Ag Ni Contact Ag Ag Au Ag Ag Ag Ag Ag Ag （L） BNC-P-3-Ni BNC-P-3-Ni CAu BNC-P-58U BNC-P-58U-Ni BNC-P-62U BNC-P-62U-Ni UG-260/U UG-260/U-Ni P/N φ14.5 φA Applicable Cable 3D-2W 3C-2W 3D-2W 3C-2W 3C-2T 3C-2T φA 7.1 7.1 8.0 8.0 (L) 29.1 29.1 30.0 30.0 Finish Shell Ag Ni Ag Ni Finish Shell Ag Ni Ag Ni Ni Ni Ag Ag Ni Contact Ag Ag Ag Ag Ag Ag Ag Ag Ag Contact Ag Ag Ag Ag BNC-P-3W BNC-P-3W-Ni-1 BNC-P-3CT BNC-P-3CT-Ni (L) φ17.5 φ14.5 P/N BNC-P-5 φA Applicable Cable 5D-2V 5C-2V 5D-2V 5C-2V 5D-2W 5C-2W 5D-2W 5C-2W 5C-FB 5D-FB 5C-2T 7C-2V...