Datasheet4U Logo Datasheet4U.com

AP3019A - WHITE LED STEP-UP CONVERTER

General Description

The AP3019A is an inductor-based DC/DC converter designed to drive up to eight white LEDs in series for backlight.

Only one feedback resistor is needed to control the LED current and obtain required brightness.

Key Features

  • Inherently Uniform LED Current.
  • High Efficiency up to 84%.
  • No Need for External Schottky Diode.
  • Output Over-voltage Protection (OVP).
  • Fixed 1.2MHz Switching Frequency.
  • Uses Tiny 1mm Tall Inductor.
  • Requires only 0.22F Output Capacitor SW 1 GND 2 FB 3 6 VIN 5 VOUT 4 CTRL K/KT Package (SOT-23-6/TSOT-23-6).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP3019A WHITE LED STEP-UP CONVERTER BCD Semiconductor
AP3019 WHITE LED STEP-UP CONVERTER BCD Semiconductor
AP3012 STEP-UP DC-DC CONVERTER BCD Semiconductor
AP3015 MICRO POWER STEP-UP DC-DC CONVERTER BCD Semiconductor
AP3015A MICRO POWER STEP-UP DC-DC CONVERTER BCD Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AP3012 1.5MHZ STEP-UP DC-DC CONVERTER
AP3031 WHITE LED STEP-UP CONVERTER
AP3036B WHITE LED STEP-UP CONVERTER
AP3041 BOOST CONTROLLER
AP3064 FOUR-CHANNEL CURRENT SOURCE BOOST LED DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NEW PRODUCT AP3019A WHITE LED STEP-UP CONVERTER Description The AP3019A is an inductor-based DC/DC converter designed to drive up to eight white LEDs in series for backlight. Only one feedback resistor is needed to control the LED current and obtain required brightness. Pin Assignments (Top View) Pin 1 Mark A constant frequency 1.2MHz PWM control scheme is employed in this IC, which means tiny external components can be used. Specifically, 1mm tall inductor and 0.22F output capacitor for a typical application is sufficient. Additionally, the Schottky diode in boost circuit is integrated on this chip. The AP3019A also provides a disable pin to ease its use for different systems. The output over-voltage protection is implemented in AP3019A.