Datasheet4U Logo Datasheet4U.com

AP3041 - BOOST CONTROLLER

General Description

The AP3041 is a current mode high voltage low-side channel MOSFET controller, which is ideal for boost regulators.

Key Features

  • needed to implement single-ended primary topology DC/DC converters. The input voltage of AP3041 ranges from 5V to 27V. Its operation frequency is adjustable from 100kHz to 1MHz. The AP3041 has UVLO (Under Voltage Lock Out) circuit. It uses two external resistors to set the UVLO voltage. The AP3041 also has an over output voltage protection to limit the output voltage. The OVP voltage can be set through external resistors. If the output voltage is higher than the OVP high threshold point, it will.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP3041 Boost Controller BCD Semiconductor
AP3000 1/4 INCH DIAPHRAGM VALVE APTech
AP3000A-00 SILICON PIN DIODE CHIP ASI
AP3000C-11 SILICON PIN DIODE ASI
AP3001 PWM BUCK DC-DC CONVERTER BCD Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AP3012 1.5MHZ STEP-UP DC-DC CONVERTER
AP3019A WHITE LED STEP-UP CONVERTER
AP3031 WHITE LED STEP-UP CONVERTER
AP3036B WHITE LED STEP-UP CONVERTER
AP3064 FOUR-CHANNEL CURRENT SOURCE BOOST LED DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AP3041 BOOST CONTROLLER FOR WLED DRIVER IN MEDIUM-SIZED LCD PANEL ADVANCED INFORMATION Description The AP3041 is a current mode high voltage low-side channel MOSFET controller, which is ideal for boost regulators. It contains all the features needed to implement single-ended primary topology DC/DC converters. The input voltage of AP3041 ranges from 5V to 27V. Its operation frequency is adjustable from 100kHz to 1MHz. The AP3041 has UVLO (Under Voltage Lock Out) circuit. It uses two external resistors to set the UVLO voltage. The AP3041 also has an over output voltage protection to limit the output voltage. The OVP voltage can be set through external resistors. If the output voltage is higher than the OVP high threshold point, it will disable the driver and the system is latched up.