Datasheet4U Logo Datasheet4U.com

DIO7004 - 5.5V Low Loss Power Distribution Switch

Description

The DIO7004 power distribution switch is intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered.

The power switch rising and falling times are controlled to minimize current surges during turning on/off.

Features

  • Input voltage: 2.7V to 5.5V.
  • Typical 75mΩ on-resistance.
  • Output discharge resistance.
  • Five different continuous current versions.
  • Under voltage lockout.
  • Over current protection, short circuit protection and over temperature protection.
  • Fault time 5ms typically with blanking.
  • Reverse blocking (no body diode).
  • No reverse current when power ON or power OFF.
  • Enable polarity: active high or active low.
  • Green SOT23-5, SOIC-8, EP-MSOP8 and MSOP-8.

📥 Download Datasheet

Datasheet preview – DIO7004

Datasheet Details

Part number DIO7004
Manufacturer DIOO MICROCIRCUITS
File Size 644.94 KB
Description 5.5V Low Loss Power Distribution Switch
Datasheet download datasheet DIO7004 Datasheet
Additional preview pages of the DIO7004 datasheet.

📁 Similar Datasheet

Other Datasheets by DIOO MICROCIRCUITS
  • DIO7195 - 5.5V Full-Function 2.5A DC Load Switch
  • DIO7231 - 5.5V Low Loss Power Distribution Switch
  • DIO7231B - 5.5V Low Loss Power Distribution Switch
  • DIO1159B - Low THD Analog Switch
  • DIO1280 - Over-Voltage Protection Load Switch
  • DIO1500 - Four-pole single-throw (4PST) Depletion Mode Isolation Switch
  • DIO20721 - RRIO 10MHz Amplifier
  • DIO20721D - RRIO 10MHz Amplifier

Full PDF Text Transcription

Click to expand full text
DIO7004 5.5V Low Loss Power Distribution Switch Rev 1.1 Features  Input voltage: 2.7V to 5.5V  Typical 75mΩ on-resistance  Output discharge resistance  Five different continuous current versions  Under voltage lockout  Over current protection, short circuit protection and over temperature protection  Fault time 5ms typically with blanking  Reverse blocking (no body diode)  No reverse current when power ON or power OFF  Enable polarity: active high or active low  Green SOT23-5, SOIC-8, EP-MSOP8 and MSOP-8 packages Descriptions The DIO7004 power distribution switch is intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered.
Published: |