DC145
DESCRIPTION
Dynex offers a range of standard clamps designed to acmodate press pack semiconductors with tie rod centres from 75mm to 210mm and clamping force from 5k N to 138k N.
The set clamps use Disc Springs to DIN 2092/2093 to apply the clamping force over a wide temperature range. The clamps also incorporate pressure indicators to make installation simple. Isolation is provided by high quality ceramic insulators and PTFE sleeving.
Zinc plating with a Yellow Passivated finish is used for enhanced corrosion protection.
If a clamp you require is not available in our standard range, Dynex can provide a clamping solution to your individual needs. Speak to your local sales representative for details.
Tie Rod Centres (mm) Forces available (k N)
145 20, 30, 35, 43, 55
The DC145 has been designed to support the mon semiconductor packages shown below.
Dynex Outline
C L V X Y
Flange Diameter (mm)
102 102 112 85 120
Height (mm)
28 36 29 27 36
ORDERING INFORMATION Example Part...
