Datasheet Details
| Part number | DS2114 |
|---|---|
| Manufacturer | Dallas Semiconducotr |
| File Size | 71.92 KB |
| Description | SCSI Terminator |
| Datasheet | DS2114_DallasSemiconducotr.pdf |
|
|
Overview: DS2114 DS2114 SCSI Terminator.
| Part number | DS2114 |
|---|---|
| Manufacturer | Dallas Semiconducotr |
| File Size | 71.92 KB |
| Description | SCSI Terminator |
| Datasheet | DS2114_DallasSemiconducotr.pdf |
|
|
|
The SCSI–2 and SCSI–3 standards recommend the use of active terminations at both ends of every cable segment in a SCSI system with single–ended drivers and receivers.
The DS2114 SCSI Terminator, which is fully compliant with these standards, enables the designer to gain the benefits of active termination: greater immunity to voltage drops on the TERMPWR (TERMination PoWeR) line, enhanced high–level noise immunity, intrinsic TERMPWR decoupling, and very low quiescent current consumption.
The DS2114 integrates a regulator and nine precise 110 ohms termination resistors into a monolithic IC.
| Part Number | Description |
|---|---|
| DS2118M | Ultra3 LVD/SE SCSI Terminator |
| DS2119M | Ultra3 LVD/SE SCSI Terminator |
| DS2108 | Differential SCSI Switchable Terminator |
| DS2120 | Ultra3 LVD SCSI Terminator |
| DS2129 | LVD SCSI 27-Line Regulator |
| DS21348 | 3.3V E1/T1/J1 Line Interface |
| DS21352 | 3.3V DS21352 and 5V DS21552 T1 Single-Chip Transceivers |
| DS21354 | MTTF is frequently used interchangeably with MTBF |
| DS21372 | 3.3V Bit Error Rate Tester BERT |
| DS2141A | T1 Controller |