Datasheet4U Logo Datasheet4U.com

DS21448 - 3.3V E1/T1/J1 Quad Line Interface

Download the DS21448 datasheet PDF. This datasheet also covers the DS2 variant, as both devices belong to the same 3.3v e1/t1/j1 quad line interface family and are provided as variant models within a single manufacturer datasheet.

General Description

The DS21448 is a quad-port E1 or T1 line interface unit (LIU) for short-haul and long-haul applications.

It incorporates four independent transmitters and four independent receivers in a single 144-pin PBGA or 128-pin LQFP package.

Key Features

  • Four Complete E1, T1, or J1 LIUs Supports Long- and Short-Haul Trunks Internal Software-Selectable Receive-Side Termination for 75W/100W/120W 3.3V Power Supply 32-Bit or 128-Bit Crystal-Less Jitter Attenuator Requires Only a 2.048MHz Master Clock for E1 and T1, with the Option to Use 1.544MHz for T1 Generates the Appropriate Line Build-Outs With and Without Return Loss fo.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (DS2-144.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number DS21448
Manufacturer Dallas Semiconducotr
File Size 1.16 MB
Description 3.3V E1/T1/J1 Quad Line Interface
Datasheet download datasheet DS21448 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS21448 3.3V E1/T1/J1 Quad Line Interface www.maxim-ic.com GENERAL DESCRIPTION The DS21448 is a quad-port E1 or T1 line interface unit (LIU) for short-haul and long-haul applications. It incorporates four independent transmitters and four independent receivers in a single 144-pin PBGA or 128-pin LQFP package. The transmit drivers generate the necessary G.703 E1 waveshapes in 75W or 120W applications and the DSX-1 or CSU line build-outs of 0dB, -7.5dB, -15dB, and -22.5dB for T1 applications. The DS21448 has a usable receiver sensitivity of 0 to -43dB for E1 applications and 0 to -36dB for T1 that allows it to operate on 0.63mm (22AWG) cables up to 2.5km (E1) and 6000ft (T1) in length.