DS1490F Datasheet | Dallas Semiconductor

FEATURES 1-Wire® to USB port adapter for direct connection to notebook and desktop puters Any i Button™ mounts in the ergonomically angled handle for touch-and-go applications such as door entry Fast, convenient puter log on with data rates up to142k bits/second from the 1-Wire signal USB guard protects the USB A connector .. during everyday use conditions. 1.5M byte speed, low power, USB 1.2 pliant for plug and play operation LED shines through translucent case to indicate status Both the 2-in-1 Fob and its resident i Button are powered entirely from an USB interface Fob sources up to 10 ma for powering 1-Wire chips that require strong pull up such as the Java™-powered or Thermochron i Button Low Profile Blue Dot extends 1-Wire signaling to other 1-Wire devices ✼ NOTE: The DS1490F 2-in-1 Fob is sold without the i Button to give choice of the desired i Button. 1 of 3 .. DESCRIPTION The 2-in-1 Fob has a DS2490 chip in its handle to convert 1-Wire signaling to USB munication. In this way an i Button, 1-Wire chip, or 1-Wire instrument can have a 2-way munication link with its USB host. Any i Button from the lowest cost to the most sophisticated can be mounted in the angled end of the fob. A Java-powered i Button in bination with the 2-in-1 Fob provides the equivalent of a Java smart card with a built in reader. Everything fits in the handle, so there is no cable for the notebook connectivity. The USB guard protects the connector from debris and mechanical stresses while attached to a key ring. Pressing the eject latch releases the guard of the 2-in-1 Fob for USB connection. Together with the appropriate USB device driver, a notebook or desktop puter can read/write the attached i Button with no cables or other power connections. You can press the Blue Dot with your i Button for touch-and-go door entry. By snapping on the Low Profile Blue Dot (DS1402L) to the i Button on the 2-in-1 Fob, the range of the 1-Wire signal can be extended to another Blue Dot...