DS2755 Datasheet | Dallas Semiconductor

FEATURES - - Snapshot Mode Allows Instantaneous Power Measurement Accurate Current Measurement for Coulomb Counting (Current Accumulation) - 2% ±4μV over ±64m V Input Range - 2% ±200μA over ±3.2A Range Using a 20mΩ Sense Resistor Current Measurement - 9-Bit Bidirectional Snapshot Measurement - 12-Bit Bidirectional Average Updated Every 88ms - 15-Bit Bidirectional Average Updated Every 2.8s Voltage Measurement - 9-Bit Snapshot Measurement - 10-Bit Measurement Updated Every 4ms Temperature Measurement - 10-Bit Measurement, 0.125°C Resolution Using Integrated Sensor Host Alerted When Accumulated Current or Temperature Exceeds User-Selectable Limits 96 Bytes of Lockable EEPROM 8 Bytes of General-Purpose SRAM Dallas 1-Wire® Interface with Unique 64-Bit Device Address with Standard 16kbps or Overdrive 142kbps Timing 3mm Dimension of 8-Pin TSSOP Package Allows Mounting on Side of Thin Prismatic Li+ and Li+/Polymer Cells PIN CONFIGURATION VIN VSS PIO VDD 1 2 2 3 2 4 8 7 6 5 DQ SNS IS2 IS1 - DS2755E 8-Pin TSSOP Package - - - - - - - DESCRIPTION The DS2755 high-precision battery fuel gauge is a data-acquisition and information-storage device tailored for cost-sensitive and space-constrained 1cell Li+/polymer battery-pack applications. The DS2755 provides the key hardware ponents required to accurately estimate remaining capacity by integrating low-power, precision measurements of temperature, voltage, current, and current accumulation, as well as nonvolatile (NV) data storage, into the small footprint of a 3.0mm x 4.4mm 8-pin TSSOP package. Through its 1-Wire interface, the DS2755 gives the host system read/write access to status and control registers, instrumentation registers, and generalpurpose data storage. Each device has a unique factory-programmed 64-bit net address that allows it to be individually addressed by the host system, supporting multibattery operation. APPLICATIONS Cell Phones Digital Cameras Smartphones PDAs Portable Consumer Products ORDERING...