DDU12H Datasheet (ECL-INTERFACED FIXED DELAY LINE)

Part: DDU12H
Manufacturer: Data Delay Devices
Size: 63.69 KB

DDU12H Key Features

Ten equally spaced outputs Fits in 300 mil 32-pin DIP socket Input & outputs fully 10KH-ECL interfaced & buffered
Minimum input pulse width: 10% of total delay Output rise time: 2ns typical Supply voltage: -5VDC ± 5% Power dissipation
Total delay is referenced to first tap output Input to first tap = 1.5ns ± 1ns NOTE: Any dash number between 10 and 1500

Related Data Delay Devices Datasheets

Part Number	Description
DDU11H	ECL-INTERFACED FIXED DELAY LINE
DDU18	ECL-INTERFACED FIXED DELAY LINE FIXED DELAY LINE
DDU-5J	10 Taps (32pins DIP) T2lL Interfaced
DDU-7	10 TAPS (14 PINS DIP) T2L INTERFACED
DDU-75F	DIGITAL DELAY UNITS

DDU12H Description

The DDU12H-series device is a 10-tap digitally buffered delay line. The IN Signal Input signal input (IN) is reproduced at the outputs (T1-T10), shifted in time by T1-T10 Tap Outputs an amount determined by the device dash number (See Table). For dash VEE -5 Volts numbers less than 20, the total delay of the line is measured from T1 to GND Ground T10.