BU-63149 Datasheet | Data Device Corporation

DESCRIPTION The BU-63147/49 transceiver is a plete dual transmitter and receiver pair conforming fully to MIL-STD-1553A and 1553B. Features include: monolithic design, +5V power supply voltage, Harris or Smiths type decoder interface, pletely independent dual redundant operation, and small size (36-pin DIP). The receiver section of the BU63147/49 series accepts phasemodulated bipolar data from a MIL-STD-1553 Data Bus and produces TTL Signal data at its output. The RX DATA OUT and RX DATA OUT outputs represent positive and negative variations of the input data signals beyond an internally fixed threshold level. An external STROBE input enables or disables the receiver’s outputs. The transmitter section accepts bi-phase TTL signal data at its TX DATA IN and TX DATA IN inputs and produces phase-modulated bipolar data at the TX DATA OUT and TX DATA OUT outputs. The transmitter’s output voltage level is typically about 11Vpp. An external input, INHIBIT, takes priority over the transmitter inputs and disables the transmitter when activated with a logic “1”. The small size, +5V power supply voltage, and pliance with MIL-STD-1553 simplify engineering design, making it an excellent choice for interfacing with any MIL-STD1553 system. FEATURES - +5V Power Supply - Low Power - Conforms Fully To MIL-STD-1553A and 1553B - Dual Transceiver - Available with MIL-STD-1760 pliant Transmitter Voltage - Available with Mc Air patible Waveform - 36-Pin DIP - HARRIS or SMITHS I/O patibility +5 V 1553 DATA BUS RECEIVER STROBE BI PHASE TTL DATA PARATOR RX DATA OUT RX DATA OUT DECODER PHASE MODULATED BIPOLAR DATA RX DATA IN SHORT OR LONG STUB COUPLING ISOLATION TRANSFORMER RX DATA IN RECEIVER SECTION FILTER FILTER PARATOR TRANSMITTER SECTION TX Data Out SHAPING NETWORK TX DATA IN TX Data Out .. SHAPING NETWORK ENCODER TX DATA IN CASE/GND TX INHIBIT FIGURE 1. BU-63147/49 BLOCK DIAGRAM (one channel shown) © 2000 Data Device Corporation TABLE 1. BU-63147/49 SPECIFICATIONS...