Datasheet4U Logo Datasheet4U.com

DNT04 - Non-Isolated Point of Load DC/DC Power Modules

Datasheet Summary

Description

The DNT series power modules have an On/Off pin for remote On/Off operation.

Both positive and negative On/Off logic options are available in the DNT series power modules.

Features

  • High Efficiency: 94%@ 5Vin, 3.3V/3A out Small size and low profile: 0.80” x 0.45” x 0.27” (SMD) 0.90” x 0.40” x 0.25” (SIP) Standard footprint and pinout Resistor-based trim Output voltage programmable from 0.75V to 3.3V via external resistors Pre-bias startup No minimum load required Fixed frequency operation Input UVLO, Output OTP, OCP Remote ON/OFF ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV (EN60950)- pend.

📥 Download Datasheet

Datasheet preview – DNT04

Datasheet Details

Part number DNT04
Manufacturer Delta Electronics
File Size 915.86 KB
Description Non-Isolated Point of Load DC/DC Power Modules
Datasheet download datasheet DNT04 Datasheet
Additional preview pages of the DNT04 datasheet.

📁 Similar Datasheet

  • DNT2400 - Low Cost 2.4 GHz FHSS Transceiver Module (Murata)
  • DNT90 - Low Cost 900 MHz FHSS Transceiver (Murata)
  • DNT90CA - (DNT90CA/PA) 900 MHz Frequency Hopping Spread Spectrum Transceiver (RF Monolithics)
  • DNT90PA - (DNT90CA/PA) 900 MHz Frequency Hopping Spread Spectrum Transceiver (RF Monolithics)
Other Datasheets by Delta Electronics

    Full PDF Text Transcription

    Click to expand full text
    FEATURES High Efficiency: 94%@ 5Vin, 3.3V/3A out Small size and low profile: 0.80” x 0.45” x 0.27” (SMD) 0.90” x 0.40” x 0.25” (SIP) Standard footprint and pinout Resistor-based trim Output voltage programmable from 0.75V to 3.3V via external resistors Pre-bias startup No minimum load required Fixed frequency operation Input UVLO, Output OTP, OCP Remote ON/OFF ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV (EN60950)- pending CE mark meets 73/23/EEC and 93/68/EECpending Delphi DNT04, Non-Isolated Point of Load www.DataSheet4U.com DC/DC Power Modules: 2.4~5.5Vin, 0.75~3.3Vo, 3A out OPTIONS The Delphi Series DNT04, 2.4-5.
    Published: |