ALR-1400 Datasheet | Digital View

PC, DVI INTERFACE CONTROLLER FOR TFT PANEL Model: ALR-1400 Part number : 41710002X-3 INSTRUCTIONS CONTENTS Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer 2. System design - Diagram of a suggested system 3. Assembly notes - Important information about system elements 5. Connection & Operation - How to use the controller 8. Connectors, pinouts & jumpers - Essential connection information 14. Controller dimensions 15. Application notes 18. Troubleshooting 19. Specifications 20. Appendix I - Graphic Mode Support Table 21. Appendix II - RS-232 control protocols 22. Appendix III - Mapping definition 24. Warranty, Caution & Limitation of Liability, Trademarks 25. Contact details It is essential that these instructions are read and understood before connecting or powering up this controller. Introduction Designed for LCD monitor and other flat panel display applications, the ALR-1400 controller provides easy to use interface controller for: TFT (active matrix) LCDs with LVDS interface of 1366x768, 1280x1024, 1280x768, 1024x768, 800x600, 640x480 resolution; puter video signals of SXGA, XGA, SVGA, VGA standard Support LVDS or TTL interface panel HOW TO PROCEED Ensure you have all parts & that they are correct, refer to: - Connection diagram (separate document for each panel) - Connector reference (in following section) - Assembly notes Check controller switch & jumper settings (errors may damage the panel) Prepare the PC Connect the parts Understand the operation and functions (in following section) IMPORTANT USAGE NOTE This product is for use by system developers and integrators, the manufacturer accepts no liability for damage or injury caused by the use of this product. It is the responsibility of the developer, integrators or other user of this product to: Ensure that all necessary and appropriate safety measures are taken. Obtain suitable regulatory approvals as may be required. Check power settings to all ponent parts before connection. Understand...