DD-1920-HDMI Datasheet | Digital View

HDMI INTERFACE CONTROLLER FOR TFT PANEL Model: DD-1920-HDMI Part number: 41730010X-3 INSTRUCTIONS CONTENTS Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer 3. System design - Diagram of a suggested system 4. Assembly notes - Important information about system elements 5. Connection & Operation - How to use the controller 9. Connectors, pinouts & jumpers - Essential connection information 16. Controller dimensions 17. Application notes 19. Troubleshooting 20. Specifications 21. Appendix I - Mode Support Table 22. Appendix II - RS-232 control protocols 26. Appendix III - Appendix III - DDC/CI support at HDMI port 27. Appendix IV - Mapping definition 28. Appendix V - DV remote control unit work for DD-1920-HDMI 30. Warranty, Caution & Limitation of Liability, Trademarks 31. Contact details It is essential that these instructions are read and understood before connecting or powering up this controller. Page 1 of 31 Introduction Designed for LCD monitor and other flat panel display applications, the DD-1920-HDMI controller provides easy to use HDMI interface controller for: - TFT (active matrix) LCDs with LVDS interface of 1920x1200, 1920x1080, 1920x480, 1680x1050, 1600x1200, 1400x1050, 1366x768, 1280x1024, 1280x800, 1280x768, 1024x768, 800x600, 800x480, 640x480, 480x640 resolution - Support HDMI 1.3 input up to 1080p/WUXGA input resolution Ordering information : Controller DD-1920-HDMI Part number P/N 41730010X-3 Ordering part number P/N 4173001XX-3 HOW TO PROCEED - Ensure you have all parts & that they are correct, refer to: - Connection diagram (separate document for each panel) - Connector reference (in following section) - Assembly notes - Check controller switch & jumper settings (errors may damage the panel) - Prepare the PC - Connect the parts - Understand the operation and functions (in following section) IMPORTANT USAGE NOTE This product is for use by system developers and integrators, the manufacturer accepts no liability for damage or...