BTC05-100A Datasheet | Digitron

DIGITRON SEMICONDUCTORS BTC05-()A SERIES BTC05-()B SERIES SILICON BIDIRECTIONAL THYRISTORS Available Non-Ro HS (standard) or Ro HS pliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Peak repetitive off-state voltage(1) (TJ = 110°C) BTC05-50A,B BTC05-100A,B BTC05-200A,B BTC05-400A,B BTC05-600A,B RMS on-state current (TC = 80°C) Peak non-repetitive surge current (1 cycle, 60 Hz, TJ = -40 to 110°C) Circuit fusing considerations (TJ = -40 to 110°C , t = 10ms) Peak gate power Average gate power Peak gate voltage Operating junction temperature range Storage temperature range Symbol Value Unit VDRM 50 100 200 400 600 5 30 4.5 10 0.5 5.0 -40 to +110 -40 to +150 Volts IT(RMS) ITSM I2t PGM PG(AV) VGM TJ Tstg Amps Amps A2s Watts Watts Volts °C °C Note 1: Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant current source for blocking capability such that the voltage applied exceeds the rated blocking voltage. Note 2: Soldering temperatures shall not exceed +200°C for 10 seconds. THERMAL CHARACTERISTICS Characteristic Thermal resistance, junction to case Thermal resistance, junction to ambient Symbol RӨJC RӨJA Maximum 3 60 Unit °C/W °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Peak blocking current (either direction) (Rated VDRM @ TJ = 110°C, gate open) Peak on-state voltage (either direction) (ITM = 5.0A peak) Peak gate trigger voltage (main terminal voltage = 12V, RL = 100Ω) MT2(+), G(+); MT2(+), G(-); MT2(-), G(-) MT2(-), G(+) (main terminal voltage = rated VDRM, RL = 10kΩ, TJ = 110°C) All quadrants Holding current (either direction) (main terminal voltage= 12V, gate open, initiating current = 1.0A, TJ = 25°C) BTC05-()A SERIES BTC05-()B SERIES Turn on time (either direction) (ITM = 14A, IGT = 100m A) Blocking voltage application rate at mutation (@ VDRM, gate open) Symbol IDRM VTM...