P5KE110 Datasheet | Digitron

FEATURES - Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. - Available as non-Ro HS (Sn/Pb plating), standard, and as Ro HS by adding “-PBF” suffix. - For Bi-directional construction, indicate a C or CA suffix after the part number, i.e. P5KE5.0CA MAXIMUM RATINGS Parameters Junction and Storage Temperature Range Thermal resistance, junction to Lead @ 3/8” lead length from body Thermal Resistance, Junction to Ambient (1) Peak Pulse Power Dissipation 10/1000µs(2) Steady-State Power Dissipation @ TL = 25°C 3/8” from body Symbol TJ, Tstg RθJL RθJA PPP Forward Voltage (3) Solder Temperature @ 10s Note 1: At TA = 25°C when mounted on FR4 PC board with 4mm2 copper pads and track width 1mm, length 25mm. Note 2: With impulse repetition rate (duty factor) of 0.01% or less. Note 3: At 30 amp peak impulse of 8.3ms half-sine wave (unidirectional only). Value -65 to +150 45 105 500 2.77 1.19(1) 3.5 260 Unit °C °C/W °C/W W V °C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Part Number P5KE5.0 P5KE5.0A P5KE6.0 P5KE6.0A P5KE6.5 P5KE6.5A P5KE7.0 P5KE7.0A P5KE7.5 P5KE7.5A P5KE8.0 P5KE8.0A P5KE8.5 P5KE8.5A P5KE9.0 P5KE9.0A P5KE10 Breakdown Voltage V(BR) Min. Volts 6.4 6.4 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 Max. Volts 7.3 7.0 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 Test Current IT m A 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 Rated Stand Off Voltage Volts 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 Max. Reverse Standby Current ID @ VWM A 600 600 600 600 400 400 150 150 50 50 25 25 5 5 1 1 1 Max. Clamping Voltage VC @ IPP Volts 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 Max. Peak Pulse Current IPP Amp 52 54.3 43.9 48.5 40.7 44.7 37.8 41.7 35.0 38.8 33.3 36.7 31.4 34.7 29.5 32.5 26.6 Max. Temp. Coefficient of V(BR) αV(BR) %/°C .057 .057...