Datasheet4U Logo Datasheet4U.com

AP1603 - STEP-UP DC/DC CONVERTER

General Description

The AP1603 is a high efficiency step-up DC-DC converter for applications using as few as a single NiMH or Li-Ion battery cells.

Only four external components are required to deliver a fixed output voltage of 3.3V.

The AP1603 starts up from less than 0.9V input with 1mA load.

Key Features

  • A Guaranteed Start-Up from less than 0.9 V.
  • High Efficiency.
  • Low Quiescent Current.
  • Less Number of External Components needed.
  • Low Ripple and Low Noise.
  • Space Saving Lead Free Package: SOT26.
  • Available in Green molding.
  • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2).
  • Halogen and Antimony Free. “Green” Device (Note 3).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP1603 Step-Up DC/DC Converter Anachip
AP160 8-BIT MICROCONTROLLER WITH 8KB OTP AMIC Technology
AP1601 STEP-UP DC/DC CONVERTER Diodes
AP1604 PWM/PFM Dual Mode Step-down DC/DC Converter Anachip
AP1605 PWM/PFM Dual-mode Step-Down Switching Regulator Anachip

Other Datasheets by Diodes Incorporated

Part Number Description
AP1604A PWM/PFM DUAL MODE STEP-DOWN DC/DC CONVERTER
AP1605 PWM/PFM DUAL-MODE STEP-DOWN SWITCHING REGULATOR
AP1609 PWM/PFM DUAL MODE STEP-UP DC/DC CONVERTER
AP1635 PWM/PFM DUAL MODE STEP-DOWN DC/DC CONVERTER
AP1084 5A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AP1603 STEP-UP DC-DC CONVERTER Description The AP1603 is a high efficiency step-up DC-DC converter for applications using as few as a single NiMH or Li-Ion battery cells. Only four external components are required to deliver a fixed output voltage of 3.3V. The AP1603 starts up from less than 0.9V input with 1mA load. Pulse Frequency Modulation scheme brings optimized performance for applications with light output loading and low input voltages. The output ripple and noise are lower compared with the circuits operating in PSM mode. Pin Assignments ( Top View ) FB 1 6 SHDN GND 2 AP1603 5 OUT The PFM control circuit operating in 150kHz (max.) switching rate results in smaller passive components.