Datasheet4U Logo Datasheet4U.com

74LVC540A - OCTAL BUFFER/LINE DRIVER

General Description

The 74LVC540A is an octal inverting buffer/driver is designed for driving bus lines or buffer memory address registers.

Key Features

  • Supply Voltage Range from 1.65V to 3.6V.
  • Sinks or Sources 24mA at VCC = 3V.
  • CMOS Low Power Consumption.
  • IOFF Supports Partial Power Down Operation.
  • Inputs or Outputs Accept Up to 5.5V.
  • Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC540A Low-Voltage CMOS Octal Buffer ON Semiconductor
74LVC541A Octal buffer/line driver NXP
74LVC541A Octal buffer/line driver nexperia
74LVC541A Low-Voltage CMOS Octal Buffer ON Semiconductor
74LVC541A-Q100 Octal buffer/line driver nexperia

Other Datasheets by Diodes Incorporated

Part Number Description
74LVC541A OCTAL BUFFER/LINE DRIVER
74LVC573A OCTAL TRANSPARENT D-TYPE LATCH
74LVC574A OCTAL D-TYPE FLIP-FLOP
74LVC00A QUADRUPLE 2-INPUT NAND GATES
74LVC04A HEX BUFFERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NEW PRODUCT 74LVC540A OCTAL BUFFER/ LINE DRIVER WITH 3 STATE OUTPUTS Description The 74LVC540A is an octal inverting buffer/driver is designed for driving bus lines or buffer memory address registers. The 3-state control gate is a 2-input AND gate with active-low inputs so that, if either output enable (OE1 or OE2) input is high, all eight outputs are in the high-impedance state..These devices feature inputs and outputs on opposite sides of the package that facilitate printed circuit board layout. The device is designed for operation with a power supply range of 1.65V to 3.6V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF.