Datasheet4U Logo Datasheet4U.com

AH3562Q - HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH

General Description

The AH3562Q is an AECQ100-qualified high-voltage, high-sensitivity Hall effect omnipolar switch IC designed for position and proximity sensing in automotive applications, such as in seat and seatbelt buckles, steering lock/immobilization, gear stick, transmission actuator and gear position, HVAC com

Key Features

  • Omnipolar Operation.
  • High Sensitivity: BOP and BRP of ±20G and ±10G Typical.
  • Single Open-Drain Output with Overcurrent Limit.
  • 3.0V to 28V Operating Voltage Range.
  • Chopper-Stabilized Design Provides o Superior Temperature Stability o Minimal Switch Point Drift o Enhanced Immunity to Stress.
  • Good RF Noise Immunity.
  • Reverse Blocking Diode.
  • Zener Clamp on Supply and Output Pins.
  • -40°C to +150°C Operating Temperature.

📥 Download Datasheet

Datasheet Details

Part number AH3562Q
Manufacturer Diodes Incorporated
File Size 632.97 KB
Description HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH
Datasheet download datasheet AH3562Q Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AH350 Linear Hall-Effect Sensors Anachip
AH3502 Linear Hall ETC
AH3503 LINEAR HALL-EFFECT SENSOR NANJING AH ELECTRONICS
AH3 High Dynamic Range Gain Block WJ Communication
AH3 High Dynamic Range Gain Block TriQuint Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AH3563Q HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH
AH3564Q HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH
AH3572 HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH
AH3574 HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH
AH3582 HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Description The AH3562Q is an AECQ100-qualified high-voltage, high-sensitivity Hall effect omnipolar switch IC designed for position and proximity sensing in automotive applications, such as in seat and seatbelt buckles, steering lock/immobilization, gear stick, transmission actuator and gear position, HVAC compression, wiper, door/trunk closure, and so on. To support a wide range of demanding applications, the design is optimized to operate over the supply range of 3.0V to 28V. With chopper-stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3562Q provides a reliable solution over the whole operating range. For robustness and protection, the device has a reverse blocking diode with a zener clamp on the supply.