Datasheet4U Logo Datasheet4U.com

AH3775 - HIGH-VOLTAGE MEDIUM-SENSITIVITY HALL EFFECT LATCH

General Description

The AH3775 is a high-voltage medium-sensitivity Hall Effect latch IC designed for commutation of brushless DC motors, flow meters, linear encoders and position sensors in industrial and consumer home appliances and personal care applications.

Key Features

  • Bipolar Latch Operation (South Pole: On, North Pole: off).
  • 3.0V to 28V Operating Voltage Range.
  • Medium Sensitivity: BOP and BRP of +70G and -70G Typical.
  • Single, Open-Drain Output with Overcurrent Limit.
  • Chopper Stabilized Design Provides: - Superior Temperature Stability - Minimal Switch Point Drift - Enhanced Immunity to Stress.
  • Good RF Noise Immunity.
  • Reverse Blocking Diode and Zener Clamp on Supply.
  • -40C to +125C Oper.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AH373 Internal Pull-up Hall Effect Latch Anachip
AH373 INTERNAL PULL-UP HALL EFFECT LATCH Diodes Incorporated
AH375 Single Phase Hall Effect Latch Anachip
AH375 SINGLE PHASE HALL EFFECT LATCH Diodes Incorporated
AH3761 HIGH SENSITIVITY HALL EFFECT LATCH Diodes Incorporated

Other Datasheets by Diodes Incorporated

Part Number Description
AH3772 HIGH-SENSITIVITY HALL EFFECT LATCH
AH3774 HIGH-VOLTAGE HIGH-SENSITIVITY HALL EFFECT LATCH
AH3776 HIGH-SENSITIVITY HALL EFFECT LATCH
AH3777 HIGH-VOLTGAE LOW-SENSITIVITY HALL EFFECT LATCH
AH372 INTERNAL PULL-UP HALL EFFECT LATCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AH3775 HIGH-VOLTAGE MEDIUM-SENSITIVITY HALL EFFECT LATCH Description The AH3775 is a high-voltage medium-sensitivity Hall Effect latch IC designed for commutation of brushless DC motors, flow meters, linear encoders and position sensors in industrial and consumer home appliances and personal care applications. To support wide range of demanding applications, the design is optimized to operate over the supply range of 3.0V to 28V. With chopper stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3775 provides a reliable solution over the whole operating range. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply.