AL8807BQ Datasheet | Diodes Incorporated

NOT REMENDED FOR NEW DESIGN USE AL8860Q OR AL8861Q AUTOMOTIVE GRADE 30V 1.3A PWM DIMMABLE BUCK LED DRIVER Description Pin Assignments The AL8807BQ is a step-down DC/DC converter designed to drive LEDs with a constant current. The device can drive up to 9 LEDs, depending on the forward voltage of the LEDs, in series from a voltage source of 6V to 30V. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The AL8807BQ switches at frequency up to 1MHz with controlled rise and fall times to reduce EMI. This allows the use of small size external ponents, hence minimizing the PCB area needed. Maximum output current of AL8807BQ is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying a PWM signal at the CTRL input pin. An input voltage of 0.4V or lower at CTRL switches off the output MOSFET simplifying PWM dimming. SET GND GND CTRL Applications - Automotive Lamps (Top View) MSOP-8EP VIN N/C SW SW Features - LED driving current up to 1.3A - Better than 5% accuracy - High efficiency up to 96% - Optimally controlled switching speeds - Operating input voltage from 6V to 30V - PWM input for dimming control - Open-Circuit LED protection - LED Chain Short Circuited - Over-Temperature Protection - MSOP-8EP Available in “Green” Molding pound (No Br, Sb) with lead Free Finish/ Ro HS pliant - Totally Lead-Free & Fully Ro HS pliant (Notes 1 & 2) - Halogen and Antimony Free. “Green” Device (Note 3) - Automotive Grade - Qualified to AEC-Q100 Standards for High Reliability - PPAP Capable (Note 4) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (Ro HS) & 2011/65/EU (Ro HS 2) pliant. 2. See http://.diodes./quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are...