AP2132 Datasheet | Diodes Incorporated

Description A Product Line of Diodes Incorporated 2A CMOS LDO REGULATOR Pin Assignments The AP2132 series are positive voltage regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power transistor, a resistor network for setting output voltage, a current limit circuit for current protection, and a chip enable circuit. (Top View) The AP2132 have Features of large current, low dropout voltage, high output voltage accuracy, and low input voltage. The AP2132 provide a power good (PG) signal to indicate if the voltage level of VOUT reaches 92% of its rating value. And it operates with a VIN as low as 1.4V and VPP voltage 5V with output voltage programmable as low as 0.6V. The AP2132 are available in 1.2V, 1.5V, 1.8V, 2.5V fixed output voltage versions and adjustable output voltage version. The fixed versions integrate the adjust resistors. It is also available in an adjustable version, which can set the output voltage with external resistor. If the pin of adjustable output voltage is to ground, it will switch to fixed output voltage. The AP2132 series are available in PSOP-8 package. Applications - Notebook Features PSOP-8 - Adjustable Output: 0.6V to 3.0V - Low Dropout Voltage: 300m V@IOUT = 2A, VOUT = 1.2V - Over Current and Over Temperature Protection - Enable Pin - PSOP-8 Package with Thermal Pad - Maximum Output Current: 2A - High Output Voltage Accuracy: 2% - VOUT Power Good Signal - Excellent Line/Load Regulation - Totally Lead-Free & Fully Ro HS pliant (Notes 1 & 2) - Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (Ro HS) & 2011/65/EU (Ro HS 2) pliant. 2. See http://.diodes./quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm...