Datasheet4U Logo Datasheet4U.com

AP3125A - GREEN MODE PWM CONTROLLER

General Description

The DIODES™ AP3125A is a current mode PWM controller optimized for high performance, low standby power, and cost-effective offline flyback converters.

The PWM switching frequency at normal operation is internally fixed (about 65kHz).

Key Features

  • are included, such as cycle-bycycle current limit (OCP), VCC Overvoltage Protection (VOVP), internal OTP, Overload Protection (OLP), and pins’ fault protection. The versatile latch functions can be implemented using a minimal number of external components. Features.
  • Very Low Start-Up Current.
  • Current Mode Control.
  • Non-Audible-Noise Green-Mode Control.
  • Internal Slope Compensation.
  • Soft Start During Startup Process.
  • Frequency Fold Back for High Average Efficiency.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP3120 TRANSFORMERS apx
AP3127 PWM DC-DC Chipown
AP3127B Step-Up DC/DC Converter Chipown
AP3101 GREEN MODE PWM CONTROLLER BCD Semiconductor
AP3102 GREEN MODE PWM CONTROLLER BCD

Other Datasheets by Diodes Incorporated

Part Number Description
AP3125B GREEN MODE PWM CONTROLLER
AP3125HA GREEN MODE PWM CONTROLLER
AP3125HB GREEN MODE PWM CONTROLLER
AP3125L GREEN MODE PWM CONTROLLER
AP3125R GREEN MODE PWM CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AP3125A GREEN MODE PWM CONTROLLER Description The DIODES™ AP3125A is a current mode PWM controller optimized for high performance, low standby power, and cost-effective offline flyback converters. The PWM switching frequency at normal operation is internally fixed (about 65kHz). In middle load, the IC will enter green mode to improve system efficiency with the help of frequency foldback. A minimum switching frequency (about 20kHz) is set to avoid the audible noise. In no load or light load, the IC will enter the burst mode to minimize standby power. Furthermore, the frequency dithering function is built-in to reduce EMI emission. Internal slope compensation allows more stable Peak-Current Mode control over wide range of input voltage and load conditions.