Datasheet4U Logo Datasheet4U.com

AP7362 - FAST TRANSIENT ULTRA-LOW DROPOUT LINEAR REGULATOR

General Description

The AP7362 is a 1.5A adjustable output voltage linear regulator with ultra-low dropout.

The device includes pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry.

The integrated Enable block allows the part to be turned on and off via a logic signal.

Key Features

  • 1.5A ultra-low dropout linear regulator with EN Ultra-low dropout: 220mV at 1.5A Stable with 10µF input/output capacitor, any type Wide input voltage range: 2.7V to 5.5V Adjustable output voltage: 0.6V to 5.0V Fixed output options: 1V, 1.2V, 1.5V, 1.8V, 2.5V, 3.3V Low ground pin current 25nA quiescent current in shutdown mode VADJ accuracy of ±1.5%.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP7365 Fast Transient Low Dropout Linear Regulator Diodes Incorporated
AP730P N-CHANNEL ENHANCEMENT MODE POWER MOSFET Advanced Power Electronics
AP730P-HF-3 N-CHANNEL ENHANCEMENT MODE POWER MOSFET Advanced Power Electronics
AP7335 Fast Transient Low Dropout Linear Regulator Diodes Incorporated
AP7350Q High Power LED Driver IC AP Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AP7362A FAST TRANSIENT ULTRA-LOW DROPOUT LINEAR REGULATOR
AP7361 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR
AP7361C 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR
AP7361E 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR
AP7361EA 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AP7362 1.5A, LOW QUIESCENT CURRENT, FAST TRANSIENT ULTRA-LOW DROPOUT LINEAR REGULATOR Description The AP7362 is a 1.5A adjustable output voltage linear regulator with ultra-low dropout. The device includes pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry. The integrated Enable block allows the part to be turned on and off via a logic signal. A logic high level on EN turns the device on and a logic low turns the part off. The low dropout voltage characteristics and fast transient response to step changes in load make it suitable for low voltage microprocessor applications. The typical quiescent current is approximately 0.5mA and changes little with load current.