API9221 Datasheet PDF - Diodes Car/Wall or USB Supply Input Lithium Battery Charger Specs

API9221 - Car/Wall or USB Supply Input Lithium Battery Charger

Datasheet Summary

Description

The API9221 has two supply inputs for highly integrated portable applications, enabling charging from a USB host, wall adapter, or car adapter.

The PPR pin indicates to a host controller that a safe and valid supply is connected to either VUSB or VDC.

Features

To prevent system damage, the VUSB pin uses over voltage protection (OVP) at 5.4V, and the VDC OVP is at 6.9V. Above these levels, the non-operating device is protected against damage up to 28V. For control and system start-up the API9221 has a current limited linear regulator. To protect the chip against excessive power dissipation, temperature monitoring is integrated, which folds back the current to a safe level. As the temperature rises, this fold-back begins at 125°C without completely int.

Datasheet Details

Part number	API9221
Manufacturer	DIODES
File Size	324.00 KB
Description	Car/Wall or USB Supply Input Lithium Battery Charger
Datasheet	API9221 Datasheet
Additional preview pages of the API9221 datasheet.

📁 Similar Datasheet

API4000-6 - very low cost voice synthesizer with 4-bit microprocessor (Apuls Intergrated Circuits)

API8108A - VERSATILE 10 SEC INSTANT VOICE ROM (Apuls Intergrated Circuits)

API8208 - VERSATILE 20 SEC INSTANT VOICE ROM (Apuls Intergrated Circuits)

API8208A - VERSATILE 20 SEC INSTANT VOICE ROM (Apuls Intergrated Circuits)

API8208G - OTP Voice Series (APLUS Integrated Circuits)

API820G - tiny-controller-based voice synthesizer IC (Apuls Intergrated Circuits)

API840 - 32 to 40 SEC INSTANT VOICE ROM (Apuls Intergrated Circuits)

API840N - 32 to 40 SEC INSTANT VOICE ROM (Apuls Intergrated Circuits)

API860 - single chip high quality voice synthesizer IC (Apuls Intergrated Circuits)

Full PDF Text Transcription

Click to expand full text

www.DataSheet4U.com API9221 Car/Wall or USB Supply Input Lithium Battery Charger with OVP USB Bypass and 10mA LDO Description The API9221 has two supply inputs for highly integrated portable applications, enabling charging from a USB host, wall adapter, or car adapter. The PPR pin indicates to a host controller that a safe and valid supply is connected to either VUSB or VDC. The higher charge current option from VDC will take priority if both supplies are connected. The host controller can control the state of charging via the enable pin EN . The API9221 implements the constant current/constant voltage (CC/CV) charge algorithm for Lithium based battery cells. The connected cell will be charged to 4.2V with an accuracy of 1% over the entire temperature range.

Published: Jun 29, 2010 |