Datasheet4U Logo Datasheet4U.com

BCR405UW6Q - 50 to 100mA LED CONSTANT CURRENT REGULATOR

General Description

This Linear LED driver is designed to meet the stringent requirements of automotive applications.

The BCR405UW6 monolithically integrates a transistor, diodes and resistors to function as a Constant Current Regulator (CCR) for LED driving.

Key Features

  • LED Constant Current Regulator Using PNP Emitter-Follower with Emitter Resistor to Current Limit.
  • IOUT = 50mA ± 10% constant current (Preset).
  • IOUT up to 100mA adjustable with an exte.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BCR405U LED Driver Infineon Technologies AG
BCR400R Active Bias Controller Siemens Semiconductor Group
BCR400R Active Bias Controller Infineon Technologies AG
BCR400W Active Bias Controller Siemens Semiconductor Group
BCR400W Active Bias Controller Infineon Technologies AG

Other Datasheets by Diodes Incorporated

Part Number Description
BCR405UW6 50 to 100mA LED CONSTANT CURRENT REGULATOR
BCR401UW6 10 to 100mA LED CONSTANT CURRENT REGULATOR
BCR401UW6Q 10mA to 100mA LED CONSTANT CURRENT REGULATOR
BCR402UW6 20 to 100mA LED CONSTANT CURRENT REGULATOR
BCR402UW6Q 20 TO 100mA LED CONSTANT CURRENT REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
BCR405UW6Q 50 to 100mA LED CONSTANT CURRENT REGULATOR in SOT26 Description This Linear LED driver is designed to meet the stringent requirements of automotive applications. The BCR405UW6 monolithically integrates a transistor, diodes and resistors to function as a Constant Current Regulator (CCR) for LED driving. The device regulates with a preset 50mA nominal that can be adjusted with external resistor up to 100mA. It is designed for driving LEDs in strings and will reduce current at increasing temperatures to self-protect. Operating as a series linear CCR for LED string current control then it can be used in applications with supply voltages up to 40V. With no need for additional external components, this CCR is fully integrated into a SOT26 minimizing PCB area and component count.