LM2903AQ Datasheet | Diodes Incorporated

Description The LM2901Q/LM2901AQ/LM2903Q/LM2903AQ series parators consist of four and two independent precision voltage parators with very low input offset voltage specification. They are designed to operate from a single power supply over a wide range of voltages; however operation from split power supplies is also possible. They offer low power supply current independent of the magnitude of the power supply voltage. The LM2901Q/LM2901AQ/LM2903Q/LM2903AQ series parators are designed to directly interface with TTL and CMOS. The LM2903Q/LM2903AQ dual devices are available in SO-8, MSOP8 and TSSOP-8 packages; and the LM2901Q/LM2901AQ quad devices are available in SO-14 and TSSOP-14 packages - all are in industry-standard pinouts. All devices use “green” mold pound and have been qualified to AEC-Q100 Grade 1 and are automotive pliant, supporting PPAPs. Features - Wide Power Supply Range: - Single Supply: 2V to 36V - Dual Supplies: ±1.0V to ±18V - Very Low Supply Current Drain - Independent of Supply Voltage - LM2903Q: 0.6m A - LM2901Q: 0.9m A - Low Input Bias Current: 25n A - Low Input Offset Current: ±5n A - Typical Offset Voltage: - Non-A Device: 2m V - A Device: 1m V - mon-Mode Input Voltage Range Includes Ground - Differential Input Voltage Range Equal to the Power Supply Voltage - Low Output Saturation Voltage: - LM2903Q: 200m V at 4m A - LM2901Q: 100m V at 4m A - Output Voltage patible with TTL, MOS and CMOS - Qualified to AEC-Q100 Grade 1 - Totally Lead-Free & Fully Ro HS pliant (Notes 1 & 2) - Halogen and Antimony Free. “Green” Device (Note 3) - The LM2901Q/LM2901AQ/LM2903Q/LM2903AQ is suitable for automotive applications requiring specific change control; this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF16949 certified facilities. https://.diodes./quality/product-definitions/ Pin Assignments LM2903Q/LM2903AQ (Top View) 1OUT 1 1IN- 2 - 1 1IN+ 3 GND 4 + 8 VCC 7...