PI3DPX1203 Datasheet | Diodes Incorporated

Description Peri's PI3DPX1203 is the Displayport pliant, up to 4 channel, 8.1 Gbps Linear Redriver with Link Training transparency support. Displayport source-side and sink-side devices municate through the AUX transaction between the source and the sink-side devices. Input Equalization, Voltage Swing and Flat Gain control can configure with pin-strapping or I2C programing to optimized Main Link high speed signals over a variety of physical medium by reducing inter-symbol interference. Peri's Linear Redriver technology can deliver 2 times better additive jitters performance than traditional Redrivers. Linear Equalizer always provide very flexible ponent placement, cascade connection and easy adjustment after the Redriver location changes during the product development events. Applications ÎÎ Display, Monitors ÎÎ Active Adaptors, Dongles, Docking ÎÎ Notebook, Desk Top, AIO PC Transmitter CHIPSET DP++ Tx AC-coupled DP Mainlink DDC SCL/SDA DP++ Level Shifter PI3DPX1203 D0 D1 D2 CLK Figure 1-1.  DP1.4 Re Driver in the NB PC Features ÎÎ pliant with VESA Display Port 1.4 specification up to 10 Gbps Link Rate ÎÎ Linear Re Driver allows flexible placement with Main Link boost setting ÎÎ Ideal for DP/USB Type-C Source and Sink-side application with PD Controllers with Aux Link Training Transparent Mode support ÎÎ Linear Equalizer Increases Main Link Margin with sink-side DFE (Decision Feedback Equalizer) ÎÎ Independent Main Link channel configuration for 4-bit Equalization, 2-bit Voltage Output swing and 2-bit Flat Gain control ÎÎ Pin strap or I2C programmable for device Configuration setting ÎÎ Intra- and Inter-Channel Polarity swap support ÎÎ I2C Address selectable for configuration register access ÎÎ Power Supply Voltage: 3.3V Cable Display Port Redriver Aux-ch Control Circuit Type-C to DP1.3 Adaptor DP1.3 Figure 1-2.  Re Driver in the DP1.4 Type-C Dongle Ordering Information Package Ordering Number Code Package Description PI3DPX1203 ZHEX 42-pin, Very Thin...