Datasheet4U Logo Datasheet4U.com

ZXGD3104 - SYNCHRONOUS MOSFET CONTROLLER

Download the ZXGD3104 datasheet PDF. This datasheet also covers the ZXGD3104N8 variant, as both devices belong to the same synchronous mosfet controller family and are provided as variant models within a single manufacturer datasheet.

General Description

The ZXGD3104 is intended to drive MOSFETs configured as ideal diode replacements.

The device is comprised of a differential amplifier detector stage and high current driver.

Key Features

  • 5-25V VCC Range.
  • Operating up to 250kHz.
  • Suitable for Discontinuous Conduction Mode (DCM), Critical Conduction Mode (CrCM), and Continuous Conduction Mode (CCM) Operation.
  • Turn-Off Propagation Delay 15ns and Turn-Off Time 20ns.
  • Proportional Gate Drive Control.
  • Detector Threshold Voltage -10mV.
  • Standby Current 5mA.
  • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2).
  • Halogen and Antimony Free. “Green” Device (Note 3).
  • Qualified to AEC-Q101 Sta.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ZXGD3104N8-Diodes.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
ZXGD3103 SYNCHRONOUS MOSFET CONTROLLER Diodes Incorporated
ZXGD3103N8 SYNCHRONOUS MOSFET CONTROLLER Diodes Incorporated

Other Datasheets by Diodes Incorporated

Part Number Description
ZXGD3104N8 SYNCHRONOUS MOSFET CONTROLLER
ZXGD3101 SYNCHRONOUS RECTIFIER CONTROLLER
ZXGD3101N8 SYNCHRONOUS RECTIFIER CONTROLLER
ZXGD3101T8 SYNCHRONOUS RECTIFIER CONTROLLER
ZXGD3102 ACTIVE OR-ING CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Description The ZXGD3104 is intended to drive MOSFETs configured as ideal diode replacements. The device is comprised of a differential amplifier detector stage and high current driver. The detector monitors the reverse voltage of the MOSFET, such that if the body diode conduction occurs, a positive voltage is applied to the MOSFET’s Gate Pin. Once the positive voltage is applied to the Gate, the MOSFET switches on. The detector’s output voltage is then proportional to the MOSFET Drain-Source voltage, and this is applied to the Gate via the driver. This action provides a rapid MOSFET turn-off at zero Drain current.