E-CMOS EC24C08T
The EC24C08T only uses the A2 input for hardwire addressing and a total of two 8K devices may be addressed on a single bus system. The A0 and A1 pins are no connects and can be connected to ground. The EC24C16T does not use the device address pins, which limits the number of devices on a single bus to one.| Part No. | EC24C08T |
|---|---|
| Datasheet | EC24C08T Download |
| Manufacturer |  E-CMOS |
| Description | 8K-bit 2-WIRE SERIAL CMOS EEPROM |
| Buy | Stock & Price |
FEATURES
●Wide Voltage Operation - VCC = 1.8V to 5.5V●Operating Ambient Temperature: -40℃ to +85℃
●Internally Organized: - EC24C02T, 256 X 8 (2K bits) - EC24C04T, 512 X 8 (4K bits) - EC24C08T, 1024 X 8 (8K bits) - EC24C16T, 2048 X 8 (16K bits)
●Two-wire Serial Interface
●Schmitt Trigger, Filtered Inputs for Noise Suppression
●Bidirectional Data Transfer Protocol
●1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility
●Write Protect Pin for Hardware Data Protection
●8-byte Page (2K), 16-byte Page (4K, 8K, 16K) Write Modes
●Partial Page Writes Allowed
●Self-timed Write Cycle (5 ms max)
●High-reliability - Endurance: 1 Million Write Cycles - Data Retention: 100 Years
●DIP8, SOP8、TSSOP8、MSOP8 and SOT23-5 Packages
●Die Sales: Wafer Form, Waffle Pack
GENERAL DESCRIPTION
The EC24C02T/EC24C04T/EC24C08T/EC24C16T provides 2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential.
