E-CMOS EC9304
The EC9304 is a synchronous buck controller. The device need externals high side and external low side power MOSFETs, and provides 5A of continuous load current and a wide input voltage of 8V to 40V. F002 40V Synchronous Buck Controller With 2CH CC/CV EC9304 Pin Assignment The package of EC9304 is TDFN-12L (3x3) package; the pin assignment is given by: Name BS SENSE VIN GH LX GL PGND/ GND FB COMP CS1 CS2 VREF PGND PAD Description Boot-Strap Pin.| Part No. | EC9304 |
|---|---|
| Datasheet | EC9304 Download |
| Manufacturer |  E-CMOS |
| Description | 40V Synchronous Buck Controller |
| Buy | Stock & Price |
GENERAL DESCRIPTION
The EC9304 is a synchronous buck controller. Current mode control provides fast transient response and cycle-by-cycle current limit. An internal soft-start prevents inrush current at turn-on, this device available in small TDFN-12L (3x3) package, provides a very compact solution with minimal external components.FEATURES
● Wide 8V to 40V Operating Input Range● Externals high side and low side Power MOSFET Switches
● Output Adjustable : VFB(1.00V±2%)
● Up to 95% Efficiency
● Internal Soft-Start and Fixed 160KHz Frequency
● Duty on ratio : 0% to 91% PWM control
● Cycle-by-Cycle Over Current Protection
● Input Under/Over Voltage Lockout Application Circuit EC9304 E-CMOS Corp. ( Page 1 of 11 6L23N Rev. Supply high side gate driver. Decouple this pin to LX pin with 0.1uF ceramic cap. Power Input Current limit sense. Power Input pin. Bypass IN to GND with a suitably large capacitor to eliminate noise on the input to the IC. Gate drive for external high side N-MOSFET.. Switching sense.
