Datasheet4U Logo Datasheet4U.com

EM65568 - 130 COM/ 128 SEG 4096 Color STN LCD Driver

Description

Modify initial duty ratio at page 58 Modify display off current IDD5 1.

Modify RF ratio register 2.

Remove application circuit of 3 wires type and 4 wires serial interface with one chip enable signals 1.

📥 Download Datasheet

Datasheet Details

Part number EM65568
Manufacturer ELAN Microelectronics
File Size 1.53 MB
Description 130 COM/ 128 SEG 4096 Color STN LCD Driver
Datasheet download datasheet EM65568 Datasheet

📁 Similar Datasheet

  • EM6503 - (EM65xx) Mask Rom (EM Microelectronic)
  • EM6504 - (EM65xx) Mask Rom (EM Microelectronic)
  • EM6505 - (EM65xx) Mask Rom (EM Microelectronic)
  • EM6517 - 4 BIT MICROCONTROLLER (ETC)
  • EM6517 - (EM65xx) Mask Rom (EM Microelectronic)
  • EM6520 - (EM65xx) Mask Rom (EM Microelectronic)
  • EM6520 - MFP version of EM6620 Ultra Low Power Microcontroller 4x8 LCD Driver (EM Microelectronic)
  • EM6521 - (EM65xx) Mask Rom (EM Microelectronic)
  • EM6521 - 4 bit Microcontroller (ETC)
  • EM6522 - (EM65xx) Mask Rom (EM Microelectronic)
Other Datasheets by ELAN Microelectronics
  • EM65565A - 65 COM/ 132 SEG STN LCD Driver
  • EM65567 - 66 COM/ 96 SEG 256 Color STN LCD Driver
  • EM65570 - 68COM / 98SEG 65K Color STN LCD Driver
  • EM65570S - 68COM/98SEG 65K Color STN LCD Drivers
  • EM65571 - 130COM / 128SEG 65K Color STN LCD Driver
  • EM65100 - 69 COM/ 101 SEG 4 Gray Level STN LCD Driver
  • EM65101 - 128COM/160SEG 16 Gray Scale Level LCD Driver
  • EM65168 - 80 COM/SEG LCD DRIVER

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Elan Microelectronics Crop. EM65568 130COM/ 128SEG 4096 Color STN LCD Driver October 12, 2004 Version 1.2 Version 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 EM65568 Specification Revision History Content Initial version 1. Add Pad configuration 2. Add the shape of alignment mark 1. Rectify 256 color mode Palette5 on Page 44 Initial value 10001 Î 10101 2. Modify DC characteristics current consumption IDD1 & IDD2, and add IDD3, IDD4, IDD5 3. Remove EXCS Modify Bias initial value 1/9 Æ 1/5 at page 57 Modify CK pin description Modify initial duty ratio at page 58 Modify display off current IDD5 1. Modify RF ratio register 2. Remove application circuit of 3 wires type and 4 wires serial interface with one chip enable signals 1. Modify VDD range: 2.2~3.3 V 2.
Published: |