EM78P5830AA Datasheet | ELAN Microelectronics

description about ADC’s offset voltage 1. Modify stack level from 16 to 12 2. Modify program ROM size from 4K to 16K 3. Rename “e FH5830A” to e FH5830AA 4. Remove IDLE mode 5. Change AD channel from 8 to 4 6. Remove 17.9MHz main CLK 1.Rename from e FH5830AA to EM785830AA Relative to EM785830AA’s ROM-less, OTP and mask: ROM-less ICE5830 OTP EM78P5830A EM78P5830AA Mask EM785830AA Difference between EM785830AA/EM78P5830A/EM78P5830AA Some differences are between EM78P5830A, EM78P5830AA and EM78P5830BA, these difference are list at next table: EM785830AA ADIS (code option) VERSEL (code option) PHO (code option) MS (IOCC page1 bit0) AD resolution Stack number Un-effect (4 channel only) Must = 0 Must = 0 Must = 1 10 bit 12 EM78P5830A EM78P5830AA Un-effect (4 channel only) Un-effect Un-effect Must = 1 8 bit 16 Un-effect (4 channel only) Must = 0 Must = 0 Un-effect 10 bit 16 User Application Note (Before using this chip, take a look at the following description note, it includes important messages.) 1. There are some undefined bits in the registers. The values in these bits are unpredicted. These bits are not allowed to use. We use the symbol “-” in the spec to recognize them. A fixed value must be write in some specific unused bits by software or some unpredicted wrong will occur. These bits are as below. Register R7 RA RA RD RD Register PAGE 1 0 2 0 0 Default value Bit 1 7 0~7 0~2 4 0 0 0 0 X Initial Setting value (by user software) 0 0 0 0 1 Effect RAM access will error Un-expect error Un-expect error Power consumption increase Un-expect error EM785830AA 8-bit Micro-controller RD RE IOC5 IOC6 IOC6 IOC7 IOC7 IOC8 IOC8 IOC9 IOCA IOCB IOCC IOCC IOCE IOCF 0 0 0 0 1 0 1 0 1 1 1 0 0 1 0 0 5~6 0~3 5~7 0~1 0~1 1~2;7 1~2;7 0~7 0~7 0~7 3,6 0~7 0;3~7 2~7 0~3 4~6 X 1 1 0 1 0 1 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Un-expect error Un-expect error Power consumption increase Power consumption increase Power consumption increase Power consumption increase Power...