ELM404 Datasheet PDF (Rotary Decoder)

ELM404 - Rotary Decoder

Description

The ELM404 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices.

The low power CMOS technology used ensures that only a very small current is required over the entire 2.

Features

Low power CMOS design Wide supply range.
2.0 to 5.5 volts Complete debouncing of the encoder inputs No external filtering needed 2x decoding Startup delay timer High current drive outputs Connection Diagram PDIP and SOIC (top view) VDD A 1 2 3 4 8 7 6 5 VSS CS Clk U/D.

Datasheet Details

Part number	ELM404
Manufacturer	ELM
File Size	74.45 KB
Description	Rotary Decoder
Datasheet	ELM404 Datasheet
Additional preview pages of the ELM404 datasheet.

📁 Similar Datasheet

ELM452 - TRANSISTOR PHOTOCOUPLER (Everlight)

ELM453 - TRANSISTOR PHOTOCOUPLER (Everlight)

ELM-1081SURWA - Dot Matrix Display (Everlight)

ELM-2001EWA - Dot Matrix Display (Everlight Electronics)

ELM-2001GWA - Dot Matrix Display (Everlight Electronics)

ELM-2001SRWA - Dot Matrix Display (Everlight Electronics)

ELM-2002EWA - Dot Matrix Display (Everlight Electronics)

ELM-2002GWA - Dot Matrix Display (Everlight Electronics)

ELM-2002SRWA - Dot Matrix Display (Everlight Electronics)

ELM-2081SURWA - Dot Matrix Display (Everlight)

Full PDF Text Transcription

Click to expand full text

ELM404 Rotary Decoder - 3 wire 2x Interface Description The ELM404 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 volt operating range. There is no need for external filtering or debounce circuits with the ELM404, as this is all performed within the integrated circuit. After debouncing the encoder signals, the ELM404 determines the direction of shaft rotation, and then generates the appropriate outputs. The polarity of the clock output can be changed at any time to accommodate different needs.

Published: Dec 20, 2013 |