ELM440 Datasheet PDF (60Hz Generator)

ELM440 - 60Hz Generator

Description

The ELM440 is an 8 pin digital divider integrated circuit, that provides both 60Hz and 1Hz outputs from a common 3.58MHz NTSC colourburst crystal.

Externally, the designer need only provide the crystal and two appropriate loading capacitors, as well as a suitably bypassed power supply.

Features

Low power CMOS design.
Wide supply range - 3.0 to 5.5 volt operation.
Generates both 60Hz and 1Hz references.
Automatically synchronizes to the line frequency for long term stability, when it’s available.
Uses a standard 3.58MHz crystal for the time reference if there is no sync input.
High current drive outputs - up to 25 mA Connection Diagram PDIP and SOIC (top view) VDD XT1 XT2 reset 1 2 3 4 8 7 6 5 VSS 60Hz 1Hz sync.

Datasheet Details

Part number	ELM440
Manufacturer	ELM
File Size	43.04 KB
Description	60Hz Generator
Datasheet	ELM440 Datasheet
Additional preview pages of the ELM440 datasheet.

📁 Similar Datasheet

ELM452 - TRANSISTOR PHOTOCOUPLER (Everlight)

ELM453 - TRANSISTOR PHOTOCOUPLER (Everlight)

ELM-1081SURWA - Dot Matrix Display (Everlight)

ELM-2001EWA - Dot Matrix Display (Everlight Electronics)

ELM-2001GWA - Dot Matrix Display (Everlight Electronics)

ELM-2001SRWA - Dot Matrix Display (Everlight Electronics)

ELM-2002EWA - Dot Matrix Display (Everlight Electronics)

ELM-2002GWA - Dot Matrix Display (Everlight Electronics)

ELM-2002SRWA - Dot Matrix Display (Everlight Electronics)

ELM-2081SURWA - Dot Matrix Display (Everlight)

Full PDF Text Transcription

Click to expand full text

ELM440 60Hz Generator Description The ELM440 is an 8 pin digital divider integrated circuit, that provides both 60Hz and 1Hz outputs from a common 3.58MHz NTSC colourburst crystal. Externally, the designer need only provide the crystal and two appropriate loading capacitors, as well as a suitably bypassed power supply. Internal oscillator circuits then use this reference frequency to precisely derive a stable 60Hz signal. This signal is then further divided to provide a 1Hz output. The ELM440 can also be locked in synchronism to an external 60 or 120 Hz line frequency signal. If derived from the electrical grid voltage, this results in excellent long-term stability, as the power generation frequency is traceable to national standards.

Published: Dec 20, 2013 |