ELM GD25Q32C
The GD25Q32C(32M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#) and I/O3 (HOLD#). The Dual I/O data is transferred with speed of 240Mbits/s and the Quad I/O & Quad Output data is transferred with speed of 480Mbits/s. DEVICE OPERATION SPI Mode Standard SPI The GD25Q32C feature a serial peripheral interface on 4 signals bus: Serial Clock (SCLK), Chip Select (CS#), Serial Data Input (SI) and Serial Data Output (SO).
| Part No. |
GD25Q32C |
| Datasheet |
GD25Q32C
Download
|
| Manufacturer |
 ELM |
| Description |
3.3V Uniform Sector Dual and Quad Serial Flash |
| Buy |
Stock & Price
|
FEATURES
♦ 32M-bit Serial Flash ♦ Program/Erase Speed - 4096K-byte - 256 bytes per programmable page ♦ Standard, Dual, Quad SPI - Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD# - Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD# - Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3 ♦ High Speed Clock Frequency - 120MHz for fast read with 30PF load - Dual I/O Data transfer up to 240Mbits/s - Quad I/O Data transfer up to 480Mbits/s - Continuous Read With 8/16/32/64-byte Wrap ♦ Software/Hardware Write Protection - Write protect all/portion of memory via software - Enable/Disable protection with WP# pin - Top or Bottom, Sector or Block selection ♦ Cycling endurance - Minimum 100,000 Program/Erase Cycles ♦ Data retention - 20-year data retention typical. - Page Program time: 0.6ms typical - Sector Erase time: 50ms typical - Block Erase time: 0.15/0.25s typical - Chip Erase time: 15s typical ♦ Flexible Architecture - Sector of 4K-byte - Block of 32/64K-byte ♦ Low Power Consumption - 20mA maximum active current - 5...
