SYF Datasheet | ELNA

® TANTALUM CHIP CAPACITORS (CHIPCON) Specifications, Dimension table Lowprofile Hight type capacitors Lowprofile Hight:1.2mm Max. .. GREEN CAP SMD Specifications Item Performance 55 to 125 (Above 85˚C use category voltage) Refer to standard ratings table p10% (Except J size), p20% Refer to standard ratings table Refer to standard ratings table Test conditions: Soaking at 260˚C for 5 seconds (120Hz) (120Hz) (100k Hz) Category temperature range (˚C) Leakage current (µA) Tolerance at rated capacitance (%) Tangent of loss angle ESR Resistance to soldering heat Leakage current Percentage of capacitance change Tangent of loss angle Percentage of capacitance change Tangent of loss angle Leakage current Percentage of capacitance change Tangent of loss angle Leakage current data have been measured at derated voltage- J Size The initial specified value or less Within p20% of initial value 150% or less of the initial specified value Within 20 to 0% of the initial value Refer to standard rating table 1000% or less of the initial specified value Within 0 to 15% of the initial value Refer to standard rating table P,A2 Size The initial specified value or less Within p10% of initial value 150% or less of the initial specified value Within 10 to 0% of the initial value Refer to standard rating table 1000% or less of the initial specified value Within 0 to 10% of the initial value Refer to standard rating table 55˚C Characteristics at high and low temperature 85˚C 125˚C Leakage current Percentage of capacitance change Tangent of loss angle Test conditions: Left at 40˚C under 90 to 95% RH for 500 hours 1250% or less of the initial specified value Within 0 to 20% of the initial value Refer to standard rating table 1250% or less of the initial specified value Within 0 to 12% of the initial value Refer to standard rating table Damp heat, steady state (Humidity) Leakage current Percentage of capacitance change Tangent of loss angle Test...