B44066T0050E690 Datasheet | EPCOS

installation - - Mounting position Display and control via LED display - Permanent self-monitoring Mechanical assembly directly on a mounting plate Self check after turn-on of main voltage Optimized switching behaviour to the connected load (tuned/detuned) via the internal processor Storage of optimized parameters for optimum switching behaviour Upright; minimum 100 mm space on top and below Operation Faults Activation Temperature Voltage Capacitor failure FK PC PM PFC Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 6 August 2006 .. Thyristor module for dynamic PFC Accessories for power factor correction B44066T0050E690 Thyristor module TSM-HV50 Preliminary data Technical data Dimensions Weight Rated voltage Auxiliary supply Frequency Switching capability Activation Switching time Reset time Display Power circuit Power dissipation Fuses (mandatory for protection of ponents) Ambient operating temperature at nominal load 157 x 200 x 195 mm (w x h x d) 5 kg Max. 690 V 230 V AC 50/60 Hz 50 A (max. 60 kvar at 690 V) 10…24 V DC (approx. 20 m A) via terminal clamp, internally electrically isolated Approx. 5 ms Depending on degree of detuning and dimension of discharge resistor Status LED per phase LED triggering signal Direct connection 4 pole via busbar (cable lug...