HG-1012JA
HG-1012JA is High Stability High Frequency Oscillator manufactured by EPSON Electronics.
Crystal oscillator HIGH-STABILITY HIGH-FREQUENCY OSCILLATOR
HG-1000/2000 series
- Cylindrical AT crystal unit built-in, thus assuring high reliability.
- Excellent shock resistance and heat resistance.
- Low current consumption.
Actual size
Specifications (characteristics)
HG-1012JA HG-2012JA Specifications 1.5000 MHz to 28.63636 MHz -0.5V to +7.0V 5.0V ±0.25V -55˚C to +125˚C -40˚C to + 85˚C Under 260˚C within 10 sec. x 2 times AV: ±20ppm, BV: ±25ppm BX: ±25ppm, CX: ±30ppm 10m A max. 40% to 60% VDD -0.4V min. 0.4V max. 15p F max. 8ns max. 4ms max. ±5ppm/year max. ±2ppm/year max. 20%→80% VDD level 80%→20% VDD level Time at 4.75V to be 0 sec. Ta=25˚C SV: ±15ppm, AV: ±20ppm BX: ±25ppm Ta= -20˚C to +70˚C Ta= -40˚C to +85˚C No load condition 1/2 VDD level IOH= -0.8m A IOL=3.2m A Remarks VDD =4.75V to 5.25V
Item Output frequency range Max. supply voltage Power source voltage Operating voltage Storage temperature Temperature range Operable temperature Soldering condition Frequency stability Current consumption Duty High output voltage Low output voltage Output load condition Output rise time Output fall time Oscillation start up time Aging Shock resistance
Symbol f0 VDD-GND VDD TSTG TOPR TSOL ∆f/f0 lop t W/t VOH VOL CL t TLH t THL t OSC fa
S.R.
±10ppm max.
±2ppm max.
Three drops on a hard wooden board from 75 cm or excitation test with 3000G x 0.3ms x 1/2sine wave in 3 directions
External dimensions
NO. Pin terminal
1 2 3 4 Ts GND OUT VDD
(Unit: mm)
Remended soldering pattern
(Unit: mm)
#4
#3
#1
#2
14.0 max. 5.8 4.7 max. 4.06 0.25 0.51 5.08 0.25 min. 7.62
Do not connect TS-pin external device.
HG2012 AV 1.5000M 9357A E
9.8 max.
THE CRYSTALMASTER
ENERGY SAVING EPSON
EPSON offers effective savings to its customers through a wide range of electronic devices, such as semiconductors, liquid crystal display (LCD) modules, and crystal devices. These savings are achieved through a sophisticated melding of three different...
