Datasheet4U Logo Datasheet4U.com

F50D1G41LB-50YG2M Datasheet 1.8v 1 Gbit Spi-nand Flash Memory

Manufacturer: ESMT (Elite Semiconductor Microelectronics Technology)

Overview: ESMT Flash PRODUCT LIST Parameters VCC Width Frequency Internal ECC Correction Transfer Rate Power-up Ready Time Max Reset Busy Time Note: 1. x2 PROGRAM operation is not defined. F50D1G41LB (2M) 1.8V 1 Gbit SPI-NAND Flash Memory Values 1.

General Description

The serial electrical interface follows the industry-standard serial peripheral interface (SPI), providing a cost-effective non-volatile memory storage solution in systems where pin count must be kept to a minimum.

The device is a 1Gb SLC SPI-NAND Flash memory device based on the standard parallel NAND Flash, but new mand protocols and registers are defined for SPI operation.

It is also an alternative to SPI-NOR, offering superi

Key Features

  • Voltage Supply: 1.8V (1.7V~1.95V).
  • Organization - Memory Cell Array: (128M + 4M) x 8bit - Data Register: (2K + 64) x 8bit.
  • Automatic Program and Erase - Page Program: (2K + 64) Byte - Block Erase: (128K + 4K) Byte.
  • Page Read Operation - Page Size: (2K + 64) Byte - Read from Cell to Register with Internal ECC: 100us.
  • Memory Cell: 1bit/Memory Cell.
  • Support SPI-Mode 0 and SPI-Mode 31.
  • Fast Write Cycle Time - Program time:400us - Block Erase time: 4ms.
  • Hard.

F50D1G41LB-50YG2M Distributor