ETA ETA6005
ETA6005 is a switching Li-Ion battery charger with dynamic power-path control and input current limiting. When a battery is connected, depending on the battery voltage, the DC-DC switching regulator either pre-conditions, fast-charges the battery or just regulates a system voltage (VSYS) to a preset voltage. It does not require an external sense resistor for current sensing.| Part No. | ETA6005 |
|---|---|
| Datasheet | ETA6005 Download |
| Manufacturer |  ETA |
| Description | 3MHz Switching Charger |
| Buy | Stock & Price |
DESCRIPTION
The charging current is determined by programming ISET1 or ISET2 pin, depending on the state of the USB_DET. If USB_DET is low, indicating a valid AC adapter input is present, the charge current is set by ISET1; otherwise, it is set by ISET2. When the battery voltage reaches the termination voltage i.e. 4.35V, the charging path disconnects SYS to BATT. The ETA6005 also includes a dynamic power path when the SYS load current exceeds current limit of the DCDC regulator internally set, the SYS voltage falls below VBATT, ETA6005 turns on the power-path to supplement the system load through the battery.FEATURES
● Switching Charger with Power Path Management● Up to 95% DC-DC Efficiency
● 50mΩ Power Path MOSFET
● Up to 2.5A Max charging current
● Instant on with a dead Battery or no Battery
● No battery detection
● No External Sense resistor
● Programmable USB and AC IN Charging Current
APPLICATIONS
● Tablet, MID● Smart Phone
● Power Bank ORDERING INFORMATION PART PACKAGE PIN E...
