Datasheet4U Logo Datasheet4U.com

ETA6024 - Precision Load Switch

Description

The ETA6024 is a load switch which provides full protection to systems and loads which may encounter large current conditions.

ETA6024 offers a 95mΩ current-limited switch which can operate over an input voltage range of 2.5-5.5V.

Features

  • thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating. When the switch current reaches the current limit, the parts operate in a constantcurrent mode to prohibit excessive currents from causing damage. The ETA6024 will not turn off after a current limit fault, but will rather remain in the constant current mode indefinitely. The n FAULT output asserts low during overcurrent and reverse-voltage condit.

📥 Download Datasheet

Datasheet preview – ETA6024

Datasheet Details

Part number ETA6024
Manufacturer ETA
File Size 734.72 KB
Description Precision Load Switch
Datasheet download datasheet ETA6024 Datasheet
Additional preview pages of the ETA6024 datasheet.

📁 Similar Datasheet

  • ETA1483 - 18V High Efficiency Synchronous Step-Down Converter (ETA solutions)
  • ETA1485 - 18V High Efficiency Synchronous Step-Down Converter (ETA solutions)
Other Datasheets by ETA
  • ETA6020 - Precision Load Switch
  • ETA6021 - Precision Load Switch
  • ETA6027 - Programmable Current-Limited Load Switch
  • ETA6002 - 3MHz Switching Charger
  • ETA6003 - 3MHz Switching Charger
  • ETA6005 - 3MHz Switching Charger
  • ETA6010 - Precision Load Switch
  • ETA6011 - 5V/1A Constant Current Linear LED Driver

Full PDF Text Transcription

Click to expand full text
ETA6024 Precision Load Switch with Adjustable Current Limit DESCRIPTION The ETA6024 is a load switch which provides full protection to systems and loads which may encounter large current conditions. ETA6024 offers a 95mΩ current-limited switch which can operate over an input voltage range of 2.5-5.5V. The current limit can be externally programmed by a precision resistor, ranges from 75mA to 1.7A. Switch control is by a logic input (EN) capable of interfacing directly with low voltage control signals. Current is prevented from flowing when the switch is off and the output voltage is higher than the input voltage. ETA6024 also features thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating.
Published: |