Unknown Manufacturer 162VTRA
The 162VTRA(H) Vibration Transmitter provides a 4-20 mA output that is proportional to Velocity, which represents vibration severity. The crystal's output signal represents Acceleration and is electronically converted to Velocity. The device is LoopPowered using a 15-30 VDC power supply.| Part No. | 162VTRA |
|---|---|
| Datasheet | 162VTRA Download |
| Manufacturer | Unknown Manufacturer |
| Description | Loop-Powered 4-20 mA Vibration Transmitter |
| Buy | Stock & Price |
HOME | DISTRIBUTORS Vibration Switches | Vibration Transmitters | Vibration Monitors Vibration Meters | Vibration Analyzers | Signal Conditioners 162VTRA(H) Loop-Powered 4-20 mA Vibration Transmitter Vibration is detected using a piezo-electric crystal. A 250 ohm resistor is usually used to provide a 1-5 VDC voltage drop to the instrumentation sampling the output. TWO-WIRE VIBRATION TRANSMITTER Vibration level is an excellent indication of machine condition. The model 162VTR is intended for continuous monitoring where trending, alarm and/or shutdown is to be accomplished with a computer or PLC. Continuous monitoring of critical or unattended machinery is necessary for several important reasons:
● Since monitoring is continuous, faults are recognized immediately.
● By contrast with manual periodic monitoring, faults which develop during the intervals between data collection go undetected.
● Early detection usually permits continued operation until scheduled maintenance—rather than expensive shutdown and correction during the middle of a production run.
● Since monitoring is continuous, faults are recognized immediately.
● By contrast with manual periodic monitoring, faults which develop during the intervals between data collection go undetected.
● Early detection usually permits continued operation until scheduled maintenance—rather than expensive shutdown and correction during the middle of a production run.
