3386H Datasheet | Unknown Manufacturer

Features : - 9mm (3/8”) Square, Single-Turn. - Cermet Trimmer/Industrial/Sealed. - Higher rated power thanks to the use of cermet resistor element. - Excellent reliability for heat and humidity. - Tighter resistance tolerances available. - Ro HS pliant version available, add suffix “LF” to part number. Trimming Potentiometers Dimensions: Characteristics: Electrical Characteristics Standard Resistance Range Resistance Tolerance Absolute Minimum Resistance Contact Resistance Variation Insulation Resistance Withstand Voltage Effective Travel 10Ω ~2MΩ ±10% ≤1% or 10Ω (whichever is greater) CRV ≤ 3% R1 ≥ 1GΩ (100Vac) 600Vac 300° Tolerances: ±0.25mm(0.01”) IF NOT IDENTIFIED Units of dimensions: mm (inches) Install Dimensions: 2.54 (.100) 1 2 3 Environmental Characteristics Power Rating(315 volts max) Temperature Range Temperature Coefficient Temparature Variation Collision Electrical Endurance at 70°C 0.50W @ 70°C 0W @ 125°C -55°C ~ 125°C ±100ppm/°C -55°C, 30min, +125°C 30min 5 cycles ∆R ≤ 5%R, ∆(Uab/Uac) ≤ 10% 100m/s2, 1000 cycles, ∆R ≤ 2%R 0.50W @ 70°C 1000h, ∆R ≤ 10%R ∆(Uab/Uac) ≤ 10%, CRV ≤ 3% or 5Ω 200 cycles ∆R ≤ 10%R CRV ≤ 3% or 5Ω 1.40 ± .38 (.055 ± .015) 2.54 (.100) 2.54 (.100) mon Dimensions: ADJ. SLOT .76 WIDE (.030) X .76 DEEP (.030) X 3.15 LONG (.124) .38 MIN. (.015) 9.53 9.53 (.375) (.375) Rotational Life Physical Characteristics Starting Torque Marking Standard Packaging ≤ 35m N Resistance Code, Model, DC 50pcs, per tube 5.97 ± .89 (.235 ± .035) 5.33 (.210) .51 ± .05 DIA. PINS (.020 ± .002) 2 CCW 1 CLOCKWISE Resistance (Ohms) 10 20 50 100 200 500 1,000 2,000 5,000 10,000 Part Number 3386H-1-203__ 3386H-1-253__ 3386H-1-503__ 3386H-1-104__ 3386H-1-204__ 3386H-1-254__ 3386H-1-504__ 3386H-1-105__ 3386H-1-205__ WIPER 3 CW Part Numbering System Part Number 3386H-1-100__ 3386H-1-200__ 3386H-1-500__ 3386H-1-101__ 3386H-1-201__ 3386H-1-501__ 3386H-1-102__ 3386H-1-202__ 3386H-1-502__ 3386H-1-103__ Resistance (Ohms) 20,000 25,000 50,000 100,000...