A1252WVA-SF-2 Datasheet 1.25mm Pitch Wire To Board Connector

Manufacturer: Unknown Manufacturer

Overview: Dual 5 A, 20 V Synchronous Step-Down Regulator with Integrated High-Side MOSFET Data.

This datasheet includes multiple variants, all published together in a single manufacturer document.

Datasheet Details

Part number	A1252WVA-SF-2
Manufacturer	Unknown Manufacturer
File Size	1.67 MB
Description	1.25mm pitch wire to board connector
Datasheet	A1252WVA-SF-2 A1252 Datasheet (PDF)

The ADP2325 is a full featured, dual output, step-down dc-to-dc regulator based on a current mode architecture.

The ADP2325 integrates two high-side power MOSFETs and two low-side drivers for the external N-channel MOSFETs.

The two pulse-width modulation (PWM) channels can be configured to deliver dual 5 A outputs or a parallel-to-single 10 A output.

Input voltage: 4.5 V to 20 V ±1% output accuracy Integrated 48 mΩ typical high-side MOSFET Flexible output configuration Dual output: 5 A/5 A Parallel single output: 10 A Programmable switching frequency: 250 kHz to 1.2 MHz External synchronization input with programmable phase shift or internal clock output Selectable PWM or PFM mode operation Adjustable current limit for small inductors External compensation and soft start Startup into precharged output Supported by ADIsimPowerTM design tool.

Part Number	Description
A1252WV	1.25mm pitch wire to board connector
A1252WV-S	1.25mm pitch wire to board connector
A1252WV-SF	1.25mm pitch wire to board connector
A1252WV-SF-2	1.25mm pitch wire to board connector
A1252WR	1.25mm pitch wire to board connector
A1252WR-S	1.25mm pitch wire to board connector
A1252WR-SF	1.25mm pitch wire to board connector
A1252	1.25mm pitch wire to board connector
A1252-T	1.25mm pitch wire to board connector
A1252H	1.25mm pitch wire to board connector