Datasheet4U Logo Datasheet4U.com

AH201 - Medium Power/ High Linearity Amplifier

General Description

The AH201 is a 1W driver amplifier that offers excellent dynamic range in a low cost, 6x6mm surface mount package.

This device can be biased as low as +9V for lower power applications and as high as +12V for improved P1dB and OIP3 performance.

Key Features

  • 400.
  • 2200 MHz.
  • +30 dBm P1dB.
  • +47 dBm Output IP3.
  • 17 dB Gain @ 900 MHz.
  • z MTBF >100 Years.
  • Single Positive Supply (9-12V) Product.

📥 Download Datasheet

Datasheet Details

Part number AH201
Manufacturer Unknown Manufacturer
File Size 220.47 KB
Description Medium Power/ High Linearity Amplifier
Datasheet download datasheet AH201 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AH201 Rectifier Marconi
AH20 Hub Installation Instructions Aperio
AH200 Rectifier Marconi
AH202 1W High Linearity Amplifier WJ Communication
AH205 Mercury Vapour Rectifier ITT

Other Datasheets by Unknown Manufacturer

Part Number Description
AH201-PCB-1900 Medium Power/ High Linearity Amplifier
AH201-PCB-900 Medium Power/ High Linearity Amplifier
AH284 Hall-Effect Smart Fan Motor Controller
AH291 Low Voltage Hall-Effect Smart Fan Motor Controller
AH291 Low Voltage Hall-Effect Smart Fan Motor Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AH201 Medium Power, High Linearity Amplifier The Communications Edge TM Preliminary Product Information Product Features • 400 – 2200 MHz • +30 dBm P1dB • +47 dBm Output IP3 • 17 dB Gain @ 900 MHz •z MTBF >100 Years • Single Positive Supply (9-12V) Product Description The AH201 is a 1W driver amplifier that offers excellent dynamic range in a low cost, 6x6mm surface mount package. This device can be biased as low as +9V for lower power applications and as high as +12V for improved P1dB and OIP3 performance. The backside metalization allows excellent thermal dissipation while allowing visible evidence of solder reflow throughout the bottom of the package on a SMT board. Superior thermal design allows the product an MTBF of over 100 years at a mounting temperature of +85ºC.